ROPEX RES Resistron RES-5010 ...
skip introduction and move to features, modifications and ordering information...
The ROPEX Resistron 5000 Series of controllers utilize microprocessor technology for sensorless, closed-loop control of impulse heating elements. ROPEX controllers offer a range of configurations and protocols for simple plug-in system integration.
The use of ROPEX Resistron controls goes beyond impulse heat sealers, form fill machines, and converting equipment. ROPEX Resistron controllers also provide a solution for an extensive range of heating applications:
-
Heat-seal-bands and cutting-wires ... for hermetic sealing, and trimming of flexible films
-
Zebra and intermittent heat-seal-bands ... for skip seals and packaging ventilation
-
Impulse heating tools ... for activation of adhesives used in the bonding of non-thermoplastic materials
-
Flexible or rigid impulse blades ... for scoring, cutting, and bending of thermoplastics
-
Impulse heater coils ... for hot air bonding, and scoring of thermoplastics
-
2D and 3D contour heat-seal-elements ... for custom shaped heat-sealing, and heat-seal plus cuttings
ROPEX Resistron RES-5010 controller is at home in a diverse array of industries:
- Aerospace
- Automotive
- Cosmetics
- Chemical
- Dental
- Defense and Military
- Electronics
- Energy and Renewable Energy
- Food and Beverage
- General Industrial
- Healthcare and Hygiene
- Laboratory and Research
- Medical
- Pharmaceutical
Pictured: ROPEX Resistron RES-5010 (UL + PROFINET)
The microprocessor technology endows the Ropex Resistron RES5010 RES Heat Seal Temperature Controller with previously unattainable capabilities:
-
Very simple operation thanks to AUTOCAL, the automatic zero calibration function.
-
Good dynamic response of the control system thanks to AUTOTUNE, which adapts automatically to the controlled system.
-
High precision thanks to further improved control accuracy and linearization of the heatsealing band characteristic.
-
High flexibility: The AUTORANGE function covers a secondary voltage range from 0.4 V to 120V and a current range from 30A to 500A.
-
Automatic adjustment to the line frequency in the range from 47Hz to 63Hz.
-
Increased protection against dangerous conditions, such as overheating of the heatsealing band.
The RES-5010 RESISTRON temperature controller is equipped with two PROFINET interfaces. These interfaces can be used to control all of the controller functions and query controller information.
The ACTUAL temperature of the heatsealing band is supplied to the PROFINET interface and to an analog 0 to 10V DC output. The real heatsealing band temperafure can thus be displayed on an external temperature meter (e.g. ATR-x).
The RES-5010 features an integrated error diagnosis function, which tests both the external system (heatsealing band, wiring etc.) and the internal electronics and outputs a selective error message in case of a fault.
To increase operational safety and interference immunity, all PROFINET signals are electrically isolated from the controller and the heating circuit
Either coding switches on the temperature controller itself or the PROFINET interface can be used to adapt to different heatsealing band alloys (Alloy 20, Low-Ex etc.) and set the required temperalure range (0 ... 300°C, 0 ... 500°C, etc.).
The compact design of the Ropex RES-5010 Resistron Temperature Controller with plug-in connections make this controller an ease to install.