Force Global Ropex RES - Resistance Engineered Sealing Technologie Force Global Impulse Heat Sealing Technologies and Solutons Ropex RES - Resistance Engineered Sealing Technologie
RES DIN-rail
Mount Controllers
RES Panel Mount Controllers
RES/CIRUS
Controller Accessories
Panel Mount Controller Accessories
Validation + Verification
Tools
RES Background

ROPEX RES-440 Resistron:

RES-440 | In-stock USA

The ROPEX Resistron RES-440 controller utilizes microprocessor technology for sensorless, closed-loop control of impulse heating elements. The ROPEX RES-440 is designed for simple plug-in system integration.

The use of ROPEX Resistron controls goes beyond impulse heat sealers, form fill machines, and converting equipment. ROPEX Resistron controllers also provide a solution for an extensive range of heating applications:

  • Heat-seal-bands and cutting-wires ... for hermetic sealing, and trimming of flexible films

  • Zebra and intermittent heat-seal-bands ... for skip seals and packaging ventilation

  • Impulse heating tools ... for activation of adhesives used in the bonding of non-thermoplastic materials

  • Flexible or rigid impulse blades ... for scoring, cutting, and bending of thermoplastics

  • Impulse heater coils ... for hot air bonding, and scoring of thermoplastics

  • 2D and 3D contour heat-seal-elements ... for custom shaped heat-sealing, and heat-seal plus cuttings

The ROPEX Resistron RES-440 contains the following features:

ROPEX RES-440 Features:Ropex Resistron RES-440 Heat Seal Controller

  • µC-Technology

  • LC (green) or VF (blue)
    Display(Vacuum-Fluorescent)
    4 lines, 20-characters

  • Automatic zero calibration (AUTOCAL)

  • Automatic optimization (AUTOTUNE)

  • Automatic frequency adjustment

  • Large current and voltage range

  • Automatic configuration of secondary voltage and current ranges
    (AUTORANGE, as of software revision 100)

  • Automatic phase angle compensation
    (AUTOCOMP, as of software revision 100)

  • Booster terminal (MOD 26) as standard

  • Time control, for heat sealing time and cooling time settings

  • Preheating

  • Alarm function with fault diagnostics

  • Configurable relay output (e.g. "end of cycle")

  • Cooling controlled by time or temperature

  • Output for "set-value achieved"

  • Analog temperature output 0-10VDC
    for ACTUAL temperature

  • Selectable temperature range (0...300°C, 0...500°C)

  • Selectable heatseal band alloy (A20 (Alloy-20), A20L, NOREX)


  • RES-440 Operating Instructions:

ROPEX RES-440 Resistron Part Numbers:

Ropex part numbers for RES-440- _  / _ VAC

  • RES-440-L/115: LC-Display, Line voltage. 115VAC Part No. 744011

  • RES-440-L/230: LC-Display, Line voltage. 230VAC Part No. 744012

  • RES-440-L/400: LC-Display, Line voltage. 400VAC Part No. 744013

  • RES-440-V/115: VF-Display, Line voltage. 115VAC Part No. 744021

  • RES-440-V/230: VF-Display, Line voltage. 230VAC Part No. 744022

  • RES-440-V/400: VF-Display, Line voltage. 400VAC Part No. 744023

  • Alternate industry names for Ropex Resistron RES-440 controllers:

    • RES-440, RES440, RES_440, res-440, res440, res_440

ROPEX RES-440 Factory Repairs and Upgrades:

We offer a large range of Ropex Resistron RES impulse heatseal temperature control units, to minimize your down time, and eliminate non-compliant repairs.

All Force Global controller repairs are performed by Ropex service technicians.

ROPEX Accessories:

... available for the Ropex Resistron Heatseal Controllers:

Contact


P: 414 507-9378
F: 262 628-4451

e-mail: info@forceglobal.com

Jaw Bar Insulation
PTFE Fabric Tapes
Heatseal Bands/Wires
Heatseal Components
Jaw Bar Combinations
Tips and Tutorials
Graphics
Links