Force Global Ropex RES - Resistance Engineered Sealing Technologie Force Global Impulse Heat Sealing Technologies and Solutons Ropex RES - Resistance Engineered Sealing Technologie
RES DIN-rail
Mount Controllers
RES Panel Mount Controllers
RES/CIRUS
Controller Accessories
Panel Mount Controller Accessories
Validation + Verification
Tools
RES Background

ROPEX RES-430 Resistron:

RES-430 | USA

The ROPEX Resistron RES-430 controller utilizes microprocessor technology for sensorless, closed-loop control of impulse heating elements. The ROPEX RES-430 is designed for simple plug-in system integration.

The use of ROPEX Resistron controls goes beyond impulse heat sealers, form fill machines, and converting equipment. ROPEX Resistron controllers also provide a solution for an extensive range of heating applications:

  • Heat-seal-bands and cutting-wires ... for hermetic sealing, and trimming of flexible films

  • Zebra and intermittent heat-seal-bands ... for skip seals and packaging ventilation

  • Impulse heating tools ... for activation of adhesives used in the bonding of non-thermoplastic materials

  • Flexible or rigid impulse blades ... for scoring, cutting, and bending of thermoplastics

  • Impulse heater coils ... for hot air bonding, and scoring of thermoplastics

  • 2D and 3D contour heat-seal-elements ... for custom shaped heat-sealing, and heat-seal plus cuttings

The ROPEX Resistron RES-430 contains the following features:

ROPEX RES-430 Features:Ropex Resistron RES-430 Heat Seal Controller

  • µC-Technology

  • LC (green) Display
    4 lines, 20-characters

  • Automatic zero calibration (AUTOCAL)

  • Automatic optimization (AUTOTUNE)

  • Automatic frequency adjustment

  • Secondary control

  • Time control, for heat sealing time and cooling time settings

  • Configurable relay output (e.g. "end of cycle")

  • Time or temperature controlled cooling phase

  • 0...10VDC analog output for ACTUAL temperature

  • Load cell interface for monitoring closing pressure

  • Serial data interface (optional)

  • Automatic configuration of secondary voltage and current ranges
    (AUTORANGE, as of software revision 100)

  • Automatic phase angle compensation
    (AUTOCOMP, as of software revision 100)

  • Fault diagnostics

  • Selectable temperature range (0...300°C, 0...500°C)

  • Selectable heatseal band alloy (A20 (Alloy-20), A20L, NOREX)


  • RES-430 Operating Instructions:

ROPEX RES-430 Resistron Part Numbers:

Part numbers for RES-430- _  / _ VAC

  • RES-430-L/115: LC-Display, Line voltage. 115VAC Part No. 743001

  • RES-430-L /230: LC-Display, Line voltage. 230VAC Part No. 743002

  • Alternate industry names for RES-430 controllers:

    • RES-430, RES430, RES_430, res-430, res430, res_430

ROPEX RES-430 Factory Repairs and Upgrades:

We offer a large range of Ropex Resistron RES impulse heatseal temperature control units, to minimize your down time, and eliminate non-compliant repairs.

All Force Global controller repairs are performed by Ropex service technicians.

ROPEX Accessories:

... available for the Ropex Resistron Heatseal Controllers:

  • Line filter: LF-06480, LF-35480

  • Temperature display, temperature meter: ATR-3

  • Heatseal power transformer: PTR, TR-x

  • Temperature Sensor: TS-1

  • Twisted Cable (RES voltage measurement cable): CI-USB-1

  • High Current Cable (RES current load cables): C-TC

Contact


P: 414 507-9378
F: 262 628-4451

e-mail: info@forceglobal.com

Jaw Bar Insulation
PTFE Fabric Tapes
Heatseal Bands/Wires
Heatseal Components
Jaw Bar Combinations
Tips and Tutorials
Graphics
Links