Force Global Ropex RES - Resistance Engineered Sealing Technologie Force Global Impulse Heat Sealing Technologies and Solutons Ropex RES - Resistance Engineered Sealing Technologie
RES DIN-rail
Mount Controllers
RES Panel Mount Controllers
RES/CIRUS
Controller Accessories
Panel Mount Controller Accessories
Validation + Verification
Tools
RES Background

ROPEX RES-409 Resistron:

RES-409 | In-stock USA

The ROPEX Resistron RES-409 controller utilizes microprocessor technology for sensorless, closed-loop control of impulse heating elements. The ROPEX RES-409 is designed for simple plug-in system integration.

The use of ROPEX Resistron controls goes beyond impulse heat sealers, form fill machines, and converting equipment. ROPEX Resistron controllers also provide a solution for an extensive range of heating applications:

  • Heat-seal-bands and cutting-wires ... for hermetic sealing, and trimming of flexible films

  • Zebra and intermittent heat-seal-bands ... for skip seals and packaging ventilation

  • Impulse heating tools ... for activation of adhesives used in the bonding of non-thermoplastic materials

  • Flexible or rigid impulse blades ... for scoring, cutting, and bending of thermoplastics

  • Impulse heater coils ... for hot air bonding, and scoring of thermoplastics

  • 2D and 3D contour heat-seal-elements ... for custom shaped heat-sealing, and heat-seal plus cuttings

The ROPEX Resistron RES-409 contains the following features:

ROPEX RES-409 Features:Ropex Resistron RES-409 Heat Seal Controller

  • µC-Technology

  • Complete control via CAN-Bus interface
    (CAN 2.0A according to ISO 11898)
    Note: CANopen is not supported.

  • Automatic zero calibration (AUTOCAL)

  • Automatic optimization (AUTOTUNE)

  • Automatic frequency adjustment

  • Large current and voltage range

  • Alarm function with fault diagnostics

  • Booster terminal (MOD 26) as standard (as of February 2007)

  • Selectable temperature range (0...300°C, 0...500°C)

  • 0...10VDC analog output for ACTUAL temperature

  • Additional 24VDC control signals for START 0 (Set 0) and START 1 (Set 1)
    (as of February 2007)

  • Automatic configuration of secondary voltage and current ranges
    (AUTORANGE, as of February 2007)

  • Automatic phase angle compensation (AUTOCOMP, as of February 2007)

  • Selectable heatseal band alloy (A20 (Alloy-20), A20L, NOREX)


  • RES-409 Operating Instructions:

ROPEX RES-409 Resistron Part Numbers:

Part numbers for 115, 230 and 400VAC units

  • RES-409/115VAC Part No. 740901

  • RES-409/230VAC Part No. 740902

  • RES-409/400VAC Part No. 740903


  • CAN-Bus connection cable 3 pin, length 2m, Part No. 886487


  • Alternate industry names for RES-409 controllers:

    • RES-409, RES409, RES_409, res-409, res409, res_409

ROPEX RES-409 Factory Repairs and Upgrades:

We offer a large range of Ropex Resistron RES impulse heatseal temperature control units, to minimize your down time, and eliminate non-compliant repairs.

All Force Global controller repairs are performed by Ropex service technicians.

ROPEX Accessories and Modifications:

... available for the Ropex Resistron Heatseal Controllers:

Contact


P: 414 507-9378
F: 262 628-4451

e-mail: info@forceglobal.com

Jaw Bar Insulation
PTFE Fabric Tapes
Heatseal Bands/Wires
Heatseal Components
Jaw Bar Combinations
Tips and Tutorials
Graphics
Links