Force Global Ropex RES - Resistance Engineered Sealing Technologie Force Global Impulse Heat Sealing Technologies and Solutons Ropex RES - Resistance Engineered Sealing Technologie
RES DIN-rail
Mount Controllers
RES Panel Mount Controllers
RES/CIRUS
Controller Accessories
Panel Mount Controller Accessories
Validation + Verification
Tools
RES Background

PTFE (ZT) Zone-Tape, for Enhanced Heat Seal Band Performance and Life:

Type
Thickness
mm (inch)
Specifications / Remarks
-
-
Temperature stability:
up to 200°C
-
-
Silicone adhesive thickness
approximately 0.05 mm
-
-
Store in a cool dry place:
-
-
Optimum storage temperature
20°C +/-5, humidity 45 to 75%
PTFE Zone-Tape = ZT 28.0 x 0.08 NW 18 (28.0 mm PTFE tape width, 0.08 mm thick,
with a 18.0 mm non-adhesive free zone, and 15 mm self-adhesive strips, filament or paper)

Specifications and dimensions subject to change.

ROPEX Heat Seal Bar Consumables:

PTFE Zone-Tape with a non-adhesive free zone enables the heat seal band to freely expand and contract, without damaging or creasing the covering glass fabric.

We can also provide custom tapes, slit to your dimensions, to suit your application.

PTFE Zone-Tape maximizes your heat seal band life. The heat seal band is free to expand and contract minimizing thermal and mechanical stresses.

  • PTFE Zone-Tape minimizes the thermal barrier between the heat seal band and heat sealable substrate.

  • PTFE Zone-Tape enables lower heat seal temperatures.

  • PTFE Zone-Tape promotes maximum heat transfer (heating and cooling) for optimized heatsealing system performance.

  • Adhesive backed for easy installation, heat resistant up to 200°C.

Ordering information:

PTFE Zone-Tapes ... In-stock (custom sizes also available)

  • Part No. XXXX
    Adhesive: Silicone


  • Part No. XXXX
    Adhesive: Silicone

Contact


P: 414 507-9378
F: 262 628-4451

e-mail: info@forceglobal.com

Jaw Bar Insulation
PTFE Fabric Tapes
Heatseal Bands/Wires
Heatseal Components
Jaw Bar Combinations
Tips and Tutorials
Graphics
Links